REQUEST FOR PROPOSALS
TOWN OF CHARLESTOWN, RI
REQUEST FOR PROPOSALS
COMMERCIAL AND VILLAGE DESIGN STANDARDS
April 11, 2023
The Town of Charlestown, RI is seeking proposals from qualified design consultants with
expertise in the areas of architecture, landscape architecture, historic preservation, community
planning and other similar qualifications for the development of design standards to be applied to
new development and redevelopment in its commercial and mixed-use zoning districts.
The adopted and approved 2021 Charlestown Comprehensive Plan has a number of
recommendations relating to the town’s commercial districts. These include the enactment of
village center overlay districts governing Carolina, Shannock and Cross Mills, with specific
design standards for development in these historic villages. There is also a need to better define
standards for the current commercial districts, which includes the mixed-use Traditional Village
District (TVD) encompassing areas along the Old Post Road corridor, and the C-1, the C-2 and
the C-3 Zones. The Comprehensive Plan recommends that the nomenclature of the three C
Zones change to Village Commercial, General Commercial and Scenic Highway Commercial,
respectively. Applicants wishing to build also need a clear understanding of the process for
project review and what is considered good design, including the visual representation of such.
The need to develop and adopt commercial design standards for Charlestown has been discussed
The project objective is to develop commercial design standards for new and redeveloped
commercial and mixed-use buildings and sites in the Town of Charlestown, to include the three
village overlay districts of Carolina, Shannock and Cross Mills, as proposed in the
Comprehensive Plan; the Traditional Village District; and the three commercial districts. This
will result in specific standards to achieve attractive and viable commercial and mixed-use
districts unique to Charlestown.
Scope of Services
The design consultant will work closely with the Planning Department and the Planning
Commission, specifically a commercial design subcommittee of the commission, to undertake
the tasks described below. The town, through its GIS Department, will provide necessary project
mapping. In addition to the Town Planner and the GIS Manager, the involvement of other town
staff, including the Building and Zoning Official, will be needed to integrate new development
standards, both building design and site standards, into the zoning ordinance.
Commercial Design Subcommittee
In addition to members of the Planning Commission, it is expected that the subcommittee will
consist of members of the Charlestown Economic Improvement Commission and the Zoning
Board of Review, a liaison from the Town Council, a representative from the Charlestown
Historical Society, a local designer/builder and others as appropriate.
The activities to be undertaken are described below in three phases.
Phase 1: Background Review and Analysis
1. Review of the town’s existing zoning regulations, including the sections now regulating
development in the Traditional Village District and the Historic Village Overlay, as well as
the articles governing most new development in town, Article XII Development Plan Review
and Article XIII Development Standards.
2. Review of the relevant portions of the Charlestown Comprehensive Plan including the
chapters on Economic Opportunity and Land Use, and all other relevant documents,
including the “Shannock Historic Mill Village Design Guidelines for Building in the
Village”, October 30, 2010, by the Horsely Witten Group and Donald Powers Architects.
3. Field review of the three village districts, the Traditional Village District and the three
commercial districts (supplemented or guided by mapping prepared by the town).
The consultant will be provided with GIS mapping of the commercial districts with the
recommended adjustments to the zoning district boundaries contained in the comprehensive plan
(Future Land Use Map). Any available data from the town, such as GIS map layers and tax
assessor data, will be provided in a mapping format as needed.
4. A written analysis of the areas described above including general nature of development,
mixture of uses, area of land available for development, quality and age of the buildings,
existence of historic or iconic structures and other defining characteristics.
Any maps with new information, such as site analysis or building information developed by the
consultant, to support the written analysis will be prepared by the consultant.
5. Preparation of initial recommendations for guiding development in these areas. This will
include recommendations on how comprehensive the regulatory requirements should be.
The procedures for development plan review will be evaluated by the consultant who, in
consultation with town staff, will provide needed text changes to the appropriate sections of the
6. Public Outreach Session
Following the completion of the background work and initial recommendations, an outreach
session will be held to receive public input on the design components that could be added to the
town regulations. The town will be responsible for organizing and advertising the outreach
session, and the consultant will be responsible for facilitating this discussion.
Phase 2: Draft Design Guidelines
7. First draft of design guidelines, in an illustrated format, for new development specific to:
a. The mill villages, including residential, institutional, and mixed-use buildings
b. The Old Post Road corridor (Traditional Village District)
c. Village commercial (the small-scale commercial areas within the villages)
d. General commercial (areas of commercial zoning throughout town which are not within
the villages and not along Route 1)
e. The Route 1 scenic highway commercial corridor, with special emphasis on treatment of
facades and landscaping within the view corridor.
Design standards for the three mill village overlay districts shall be based upon the previous
work done for Shannock Village. It is not expected that these standards will be altered, only
folded into the larger effort.
The initial standards will be reviewed by the design subcommittee prior to their introduction at a
public workshop. The consultant will recommend which standards require incorporation into the
zoning ordinance directly, and which can be included by reference.
8. Preparation for and attendance at a public workshop to present the background work and the
first draft of standards and revised zoning regulations.
This workshop will be a collaborative effort by the town and the consultant.
Phase 3: Final Work Product
9. Final draft of design guidelines, in both written and illustrated format.
Following review of comments from the public workshop and the input of the design
subcommittee, a final draft of the guidelines will be prepared by the consultant. This work will
be coordinated with the preparation of final draft zoning ordinance amendments.
10. Preparation for and attendance at a Town Council public hearing to adopt the updated
procedures under Development Plan Review.
A formal presentation on the design standards will be done as a collaborative effort by the town
and the consultant. It is expected that the public hearing will take two or more evenings.
11. Submission of final documents and materials.
At a minimum it is expected that the standards will address:
Building architecture, including building type and massing, roof forms, window style and
placement, architectural elements, exterior materials.
Building location and relationships on site, including placement of multiple and/or accessory
Overall site design including parking, driveways, outside spaces (patios, courtyards),
stormwater management, on-site solar.
Landscaping, buffers, fences and walls.
Signage and lighting.
As stated above, a commercial design advisory committee, as a subcommittee of the Planning
Commission, will be established to work with the selected consultant.
The consultant team will attend meetings or have contact with the planning and other town
departments as necessary to gather all relevant data and input for the development of the
commercial and village design standards, as well as preparing for and attending a separate
schedule of the subcommittee meetings and finally, workshops and hearings directed at the
general public. The proposal should specify a meeting schedule which includes the number of
meetings and intended time allocations.
The Planning Department and/or the office of the Town Clerk shall be responsible for all
required public meeting notices and public hearing advertisements, both in local newspapers and
on the town website.
The principal work products for the project are the following:
Design guideline booklets to be used by property owners and applicants when developing in
the mill village and commercial districts.
Written design standards to be included within the Charlestown Zoning Ordinance.
The project period will begin on or about June 15, 2023, with a completion date of September
30, 2024 but will be extended as needed.
The Town of Charlestown will receive scope of work and fee proposals for developing
commercial design standards for new and redeveloped commercial and mixed-use buildings and
sites in the proposed three village overlay districts, the Traditional Village District and the three
commercial districts. At a minimum, the proposal must include the following:
Narrative description of the scope of work, which substantiates the company’s understanding
of the project objectives;
General project schedule;
Company’s experience with similar projects, and list of references;
Experience of personnel to be assigned to the project, including resumes for each individual,
qualifications, licenses and professional registrations, and hourly rates; and
Total project fee, broken down by task, with all anticipated costs for providing services.
Qualifications should include company history, description of relevant projects, familiarity with
the Town of Charlestown, and knowledge of Rhode Island comprehensive planning and zoning
laws and requirements.
Four (4) paper copies and one digital copy of the proposal are due by 3:00 pm May 8, 2023 to
be publicly opened on May 9, 2023 at 10:00am at the below address.
Mail or hand deliver copies of each sealed proposal, clearly marked “Charlestown Commercial
and Village Design Standards”, to the following address:
Charlestown Town Clerk’s Office
4540 South County Trail
Charlestown, RI 02813
Supervision and Acceptance of Design Consultant’s Work
Coordination of the development of the commercial and village design standards project will be
the responsibility of the Town Planner. The consultant shall appoint an individual to serve as
project manager on the consultant’s team behalf. The project manager will serve as the primary
point of contact and be responsible for coordinating consultant activities.
Payments on the contract shall be made on the basis of invoices submitted by the consultant for
deliverables accepted and approved by the Town Planning Department.
For additional information or any questions please contact Jane Weidman, AICP, the Town
Planner at (401) 364-1225 or email@example.com.
Please contact the Town Planner for copies of, or links to, the following:
Current Zoning Map
Future Land Use Map
Charlestown Comprehensive Plan
Shannock Village Design Guidelines booklet
Posted April 15, 2023